The Wavlink AC1200 WiFi Extender creates a seamless network throughout your home by using the same WiFi network name as your router. For Wavlink AC1200 WiFi Extender Setup, you must connect the extender to your existing WiFi network.

An owner’s manual is packaged with each new Wavlink AC1200 Extender you buy. This Wavlink AC1200 handbook includes a series of setup instructions from start to finish. The Wavlink AC1200 WiFi Extender Setup instructions are straightforward, and your extender will be ready to use in no time. To install your wavlink WiFi extender quickly and efficiently, get in touch with our professionals. They will set up your extender correctly and walk you through each step.

How can i setup Wavlink AC1200 Extender via wps 

Setup of the Wavlink AC1200 Extender

  • Activate the wavlink ac1200 repeater.
  • Put the router and WiFi extender in the same spot.
  • Once you’re finished, connect your repeater to a power outlet.
  • Watch for the wifi range extender’s Power LED to become green.
  • The extender’s WPS button should be pressed.
  • Your router and extender are correctly connected if the wavlink ac1200 Link Status LED is lit in white.
  • You should move your extender.
  • If you’re going somewhere with spotty WiFi router coverage, bring a laptop or other mobile WiFi-capable device.
  • With your WiFi-capable PC or mobile device, join the expanded network.

Note:-  If you need any help regarding your wifi extender so contact our technician or visit the official website that is ap setup.

Wavlink AC1200 Extender Setup via manual method

Do the following while setup a Wavlink AC1200 Extender:

  • It is necessary to turn on the Wavlink AC1200 Extender.
  • Place the WiFi extender near the router.
  • Connect the power outlet to your extender.
  • Watch for the Power LED to turn green before moving.
  • To the wavlink wifi extender, attach a router.
  • Open a web browser on a computer or mobile device and go to the ap.setup page. Contact our experts as soon as possible if ap.setup isn’t functioning on your device.
  • The installation assistant for wavlink appears.
  • To connect your extender to the live WiFi network, adhere to the on-screen instructions.
  • Your extender should be relocated.
  • Try again after moving the extender closer to your router until the Link Status LED turns green if you get poor or no connectivity.

Firmware update Wavlink AC1200 extender 

  • You must first turn on your wavlink ac1200 extender setup.
  • Connect a router to the extender.
  • Open your favourite web browser after you’re done.
  • In the address bar, enter ap.setup and press Enter.
  • To log in and access your extender, use the login and password.
  • To upgrade your firmware, choose Firmware Upgrade from the settings menu.
  • Press the Check button after that.
  • Select yes to install the latest firmware update if it becomes available.
  • Wait a while for the wavlink extender firmware to update successfully.

How can i reset Wavlink AC1200 wifi Extender Setup

The factory reset technique is frequently employed when it’s important to discover the admin password. Your login, password, and SSID, among other things, will all be deleted during the factory reset process, which will also get your extender ready for a new installation process.

  1. Set up the booster.
  2. Grab a paperclip.
  3. Put a paper pin in the reset button’s hole.
  4. Hold it for ten to twelve seconds.
  5. Then wait a short while for your wavlink AC1200 to be reset.
  6. As you can see, the light is continuously flashing green.
  7. You may have noticed that certain lights quickly shut off.
  8. The reset was successful.
  9. If you forget the password, you can reset the Wi-Fi Extender’s setup interface settings.


By Alberta